: The most common use is to reset the internal "absorber" or "waste ink pad" counter. When this counter reaches a specific limit, the printer stops working to prevent ink overflow; this tool resets that count to 0%. Print Head ID Input
A: No. The adjustment program only unlocks the printer. If you have clogs or banding, run a nozzle check and cleaning cycle separately. epson-px660-adjustment-program
: The most used feature, allowing for reading and resetting the current waste ink levels. How to Use the PX660 Adjustment Program : The most common use is to reset
: Click "Check" to see current levels, then "Initialization" to reset the counter to zero. Important Considerations The adjustment program only unlocks the printer
| Error Message | Cause | Solution | | :--- | :--- | :--- | | | Printer not in Service Mode | Repeat Phase 1 carefully. Timing matters. | | "Timeout error" | USB driver issue | Uninstall Epson printer drivers, then reinstall using Epson's official driver pack. | | "Wrong model selected" | Firmware version mismatch | Use a newer version of the Adjustment Program (e.g., v2.0.0 or higher). | | "Counter reset failed" | EEPROM write-protected | Perform a "EEPROM Data Backup" first, then retry the reset. | | Printer still shows error | Physical pads are full | Open the printer and manually clean/replace the pads. |