Project X 7c3 Driver Shaft Specs ((link))

| Specification | Value | | --- | --- | | | 76 grams (uncut raw weight) | | Flex | Stiff (6.0 FCM) | | Torque | 3.0 degrees | | Launch Angle | Mid | | Spin Rate | Mid (2,800 – 3,400 RPM range typical) | | Butt Diameter | .600" | | Tip Diameter | .335" (Standard for most modern drivers) | | Parallel Tip Section | 3.0 inches | | Length (Raw) | 46 inches | | Bend Point | Mid/High (Stiff tip section) |

follows the traditional Project X alphanumeric coding system, where "7" denotes the weight class and "C" indicates the specific flex and launch profile. Shaft specs - Club Fitting - Team Titleist project x 7c3 driver shaft specs

The 7C3 is not just a random serial number; it is a precise blueprint for performance. In this deep-dive guide, we will break down every technical specification, compare it to other Project X offerings, and help you determine if the 7C3 profile is right for your swing. | Specification | Value | | --- |

In the late 2000s and early 2010s, the Project X 7C3 emerged as a sturdy powerhouse in the graphite driver shaft world, specifically tailored for golfers with high swing speeds and aggressive tempos In the late 2000s and early 2010s, the

The "7C3" designation follows the classic Project X coding system, where the first number (7) indicates the weight class, and the alphanumeric code (C3) defines the stiffness and launch characteristics. Flex (Rifle Scale): 6.0, which corresponds to Tip Diameter: Approximately 2.5 degrees, designed for stability. Launch/Spin: Mid-to-low launch with low spin for a penetrating flight. Performance & Feel Project X 7C3 - Golf Monthly Forum