Mach3 Ref All Home Script Free 【TESTED ◆】

To prevent the machine from remaining on the switch, you can insert a G-code command like Code "G53 G0 Z-5" followed by While IsMoving() : Wend to move the axis away from the switch after homing. Advanced Implementation Help with Mach 3 REF all Home Button - MYCNCUK

If your machine has a dual-motor gantry (e.g., Y and A axes), the script can be modified to home them individually or together to square the gantry. This often requires separate home switches for each motor. Important Considerations mach3 ref all home script

Creating a Ref All Home script in Mach3 is a relatively straightforward process. Here's a step-by-step guide: To prevent the machine from remaining on the

If your A axis is slaved to Y (typical for dual-motor gantry), go to Config > Slave Axis and set A to follow Y. The script above will home both simultaneously. If you have a lathe with only X and Z, remove the Ref("A") line. Important Considerations Creating a Ref All Home script

The Ref All Home script transforms Mach3’s startup procedure from a repetitive multi-step task into a safe, one-click operation. By implementing the provided VB script, operators gain: