The headline feature: . The manual says “automatic switching” — and technically, yes, plugging into 230V via the included adapter lets the machine draw more power. But here’s the catch: the machine does not sense which voltage you’re using. It simply has a different input tap internally.

Thread the wire into the torch liner and close the tensioner arm. Polarity Configuration Gas Welding : Usually requires (Torch to Positive "+", Earth Clamp to Negative "-"). Gasless (Flux-Cored) : Usually requires (Torch to Negative "-", Earth Clamp to Positive "+"). Gas Connection

: If using gas, connect the regulator to a gas cylinder (CO2 or Argon/CO2 mix) and attach the hose to the rear inlet of the machine.

Use a welding mask, leather gloves, and protective clothing to guard against sparks and UV radiation.

Cem Dual Mig 120 Manual Jun 2026

The headline feature: . The manual says “automatic switching” — and technically, yes, plugging into 230V via the included adapter lets the machine draw more power. But here’s the catch: the machine does not sense which voltage you’re using. It simply has a different input tap internally.

Thread the wire into the torch liner and close the tensioner arm. Polarity Configuration Gas Welding : Usually requires (Torch to Positive "+", Earth Clamp to Negative "-"). Gasless (Flux-Cored) : Usually requires (Torch to Negative "-", Earth Clamp to Positive "+"). Gas Connection cem dual mig 120 manual

: If using gas, connect the regulator to a gas cylinder (CO2 or Argon/CO2 mix) and attach the hose to the rear inlet of the machine. The headline feature:

Use a welding mask, leather gloves, and protective clothing to guard against sparks and UV radiation. It simply has a different input tap internally