If you have an original physical manual, consider scanning it to archive.org. For everyone else, bookmark this page. The next time your 1998 CNC press freezes on boot, you will know exactly which jumper to clear.
| Feature | Specification | | :--- | :--- | | | Geode GXm 200MHz or 233MHz (Integrated northbridge) | | L1 Cache | 16KB I + 16KB D | | L2 Cache | None (uses main RAM as cacheable memory) | | RAM | 2x 72-pin SIMM, max 128MB (Parity or Non-parity, 60ns) | | BIOS | PhoenixBIOS 4.0 R3 (512KB Flash) | | Storage | 1x IDE (PIO Mode 4), 1x FDD | | I/O | 2x RS-232, 1x LPT (EPP/ECP), 1x PS/2 for KB/Mouse | | Display | Integrated Geode GX1 VGA (2MB frame buffer) via 15-pin D-sub | | Power | Single +5V DC (1.5A typical), -12V not required | | Operating Temp | 0°C to 60°C | Winfast 760m02 Gx 6ls Manual
The may be lost to time, but the board itself is a tank. National Semiconductor’s Geode architecture was designed for set-top boxes and industrial kiosks, meaning it prioritizes reliability over speed. Using the jumper guides, BIOS tricks, and pinouts in this article, you should be able to revive, reconfigure, or repurpose your legacy system. If you have an original physical manual, consider
Uses a standard 20-pin ATX main power connector and a 4-pin ATX 12V (P4) connector. | Feature | Specification | | :--- |