Gwx 75 Installation Manual ❲Top – 2027❳

| Parameter | Default Value | |-----------|----------------| | IP address | 192.168.1.200 | | Subnet mask | 255.255.255.0 | | Default gateway | 192.168.1.1 | | HTTP port | 80 | | Modbus TCP port | 502 | | Username | admin | | Password | gwx75 (factory default – change immediately) |

: The unit has a maximum base diameter of 11.7 inches. For 10-inch wing pods, installers must ensure they use the Mod 2 version, which removes the external heat sink to allow for tighter fits in smaller radomes. gwx 75 installation manual

| Pin | Signal | Description | |-----|--------|-------------| | 1 | RS485 A | Modbus RTU / Proprietary bus | | 2 | RS485 B | Modbus RTU / Proprietary bus | | 3 | GND_ISO | Isolated ground | | 4 | DI1 | Digital input 1 (5–30V DC, dry contact) | | 5 | DI2 | Digital input 2 | | 6 | DO1 | Digital output (open collector, 30V/100mA max) | | 7 | AI1+ | Analog input 1+ (0–10V or 4–20mA) | | 8 | AI1- | Analog input 1- | | 9 | CAN_H | CAN bus (optional, firmware dependent) | | 10 | CAN_L | CAN bus | | 11 | +5V_OUT | 5V sensor supply (100mA max) | | 12 | GND | Common ground | DIN rail end stops.

Flathead screwdriver (3mm), DIN rail end stops. gwx 75 installation manual