Drain and refill the chiller circuit with deionized water and anti-corrosion additive (Trumpf Part No. 0764335). Failure to do this causes galvanic corrosion in the laser head.
The automatic pallet changer runs on chains. The manual instructs you to measure the sag in the chain span. If the sag exceeds 15mm, you must tighten the take-up bolts. A loose chain leads to pallet misalignment, causing crashes.
Drain and refill the chiller circuit with deionized water and anti-corrosion additive (Trumpf Part No. 0764335). Failure to do this causes galvanic corrosion in the laser head.
The automatic pallet changer runs on chains. The manual instructs you to measure the sag in the chain span. If the sag exceeds 15mm, you must tighten the take-up bolts. A loose chain leads to pallet misalignment, causing crashes.
Kebutuhan Spesifikasi Sistem