Lighthouse-tx-htc-2-0-calibration-rescue-244.bin -

A calibration rescue refers to the process of forcibly re-flashing the factory calibration data onto a base station that has become unresponsive—usually due to:

Unless you:

(same model and revision) using lighthouse_tx dump, then manually edit calibration parameters. This requires reverse-engineering. lighthouse-tx-htc-2-0-calibration-rescue-244.bin

onto the drive. Unplug the power and USB once the copy is finished. Check Status : Plug the power back in. The light should rapidly flash (success) or (failure). Final Update

Remove the rubber cover or sticker on the back of the 2.0 base station to reveal a Micro-USB port. Connect it to your PC. A calibration rescue refers to the process of

You should only consider a calibration rescue if the following conditions are met:

If your base station is blinking red or not appearing in SteamVR, follow these steps to manually "inject" the rescue file: Base died after a Firmware update - VIVE Forum - HTC Unplug the power and USB once the copy is finished

lighthouse_tx.exe -f lighthouse-tx-htc-2-0-calibration-rescue-244.bin --force --write-calibration